Monoprice Premium 3D-Druckerfilament PLA 1,75 mm 1 kg / Rolle, weiß
Rated 3.5/5 based on 11 customer reviews

Monoprice Premium 3D-Druckerfilament PLA 1,75 mm 1 kg / Rolle, weiß

  • Produkt SKU: 10552
  • Kategorie: Filament
Verfügbarkeit: Auf Lager
€26,78
Wunschliste Vergleichen
Get great 3D printing results with Monoprice's 1.75mm PLA 3D Printer Filament! PLA is an excellent choice if you are looking for a high accuracy and high resolution print material. It extrudes at low temperatures, does not require a heated base unit and has a very low shrinkage rate of 0.3%. PLA is harder than ABS, but also a bit more brittle. Furthermore, PLA is a plant-based plastic and therefore biodegradable. It smells slightly sweetish like roasted corn. This 1 kg roller has a thickness of 1.75 mm ± 0.10 mm and a roundness deviation of only 0.03 mm. The material has a nominal processing temperature of 210 ˚C (410 ˚F). The thickness and roundness factors are laser-measured in the factory to ensure that the entire filament corresponds exactly to the specifications. A disadvantage of PLA is its susceptibility to degradation by moisture, sunlight and heat. During processing, the material is more susceptible to overheating, which can lead to dripping and sagging when temperatures are too high. 1.75 mm ± 0.10 mm PLA filament with a roundness deviation of less than 0.03 mm Nominal processing temperature of 210 ˚C (410 ˚F) 195 mm roller diameter, 95 mm hub diameter, 38 mm spindle diameter, 80 mm roller width 1 kg roller Extruded at low temperatures, does not require a heated base unit and has a very low shrinkage rate of 0.3% | PLA is a plant-based plastic and therefore biodegradable; it smells slightly sweetish like roasted corn A disadvantage of PLA is its susceptibility to degradation by moisture, sunlight and heat. During processing, the material is more susceptible to overheating, which can lead to dripping and sagging when temperatures are too high. 1.75 mm ± 0.10 mm PLA filament with a roundness deviation of less than 0.03 mm Nominal processing temperature of 210 ˚C (410 ˚F) 195 mm roller diameter, 95 mm hub diameter, 38 mm spindle diameter, 80 mm roller width 1 kg roller Extruded at low temperatures, does not require a heated base unit and has a very low shrinkage rate of 0.3% | PLA is a plant-based plastic and therefore biodegradable; it smells slightly sweetish like roasted corn A disadvantage of PLA is its susceptibility to degradation by moisture, sunlight and heat. During processing, the material is more susceptible to overheating, which can lead to dripping and sagging when temperatures are too high. 1.75 mm ± 0.10 mm PLA filament with a roundness deviation of less than 0.03 mm Nominal processing temperature of 210 ˚C (410 ˚F) 195 mm roller diameter, 95 mm hub diameter, 38 mm spindle diameter, 80 mm roller width 1 kg roller Extruded at low temperatures, does not require a heated base unit and has a very low shrinkage rate of 0.3% | PLA is a plant-based plastic and therefore biodegradable; it smells slightly sweetish like roasted corn Sunlight and heat. During processing, the material is more susceptible to overheating, which can lead to dripping and sagging when temperatures are too high. 1.75 mm ± 0.10 mm PLA filament with a roundness deviation of less than 0.03 mm Nominal processing temperature of 210 ˚C (410 ˚F) 195 mm roller diameter, 95 mm hub diameter, 38 mm spindle diameter, 80 mm roller width 1 kg roller Extruded at low temperatures, does not require a heated base unit and has a very low shrinkage rate of 0.3% | PLA is a plant-based plastic and therefore biodegradable; it smells slightly sweetish like roasted corn Sunlight and heat. During processing, the material is more susceptible to overheating, which can lead to dripping and sagging when temperatures are too high. 1.75 mm ± 0.10 mm PLA filament with a roundness deviation of less than 0.03 mm Nominal processing temperature of 210 ˚C (410 ˚F) 195 mm roller diameter, 95 mm hub diameter, 38 mm spindle diameter, 80 mm roller width 1 kg roller Extruded at low temperatures, does not require a heated base unit and has a very low shrinkage rate of 0.3% | PLA is a plant-based plastic and therefore biodegradable; it smells slightly sweetish like roasted corn 10 mm PLA filament with a roundness deviation of less than 0.03 mm nominal processing temperature of 210 ˚C (410 ˚F) 195 mm roller diameter, 95 mm hub diameter, 38 mm spindle diameter, 80 mm roller width 1 kg roller Extruded at low temperatures, does not require heated base unit and has only a very low shrinkage rate of 0.3% | PLA is a plant-based plastic and therefore biodegradable; it smells slightly sweetish like roasted corn 10 mm PLA filament with a roundness deviation of less than 0.03 mm nominal processing temperature of 210 ˚C (410 ˚F) 195 mm roller diameter, 95 mm hub diameter, 38 mm spindle diameter, 80 mm roller width 1 kg roller Extruded at low temperatures, does not require heated base unit and has only a very low shrinkage rate of 0.3% | PLA is a plant-based plastic and therefore biodegradable; it smells slightly sweetish like roasted corn 3% on | PLA is a plant-based plastic and therefore biodegradable; it smells slightly sweetish like roasted corn 3% on | PLA is a plant-based plastic and therefore biodegradable; it smells slightly sweetish like roasted corn
Get great 3D printing results with Monoprice's 1.75mm PLA 3D Printer Filament! PLA is an excellent choice if you are looking for a high accuracy and high resolution print material. It extrudes at low temperatures, does not require a heated base unit and has a very low shrinkage rate of 0.3%. PLA is harder than ABS, but also a bit more brittle. Furthermore, PLA is a plant-based plastic and therefore biodegradable. It smells slightly sweetish like roasted corn. This 1 kg roller has a thickness of 1.75 mm ± 0.10 mm and a roundness deviation of only 0.03 mm. The material has a nominal processing temperature of 210 ˚C (410 ˚F). The thickness and roundness factors are laser-measured in the factory to ensure that the entire filament corresponds exactly to the specifications. A disadvantage of PLA is its susceptibility to degradation by moisture, sunlight and heat. During processing, the material is more susceptible to overheating, which can lead to dripping and sagging when temperatures are too high. 1.75 mm ± 0.10 mm PLA filament with a roundness deviation of less than 0.03 mm Nominal processing temperature of 210 ˚C (410 ˚F) 195 mm roller diameter, 95 mm hub diameter, 38 mm spindle diameter, 80 mm roller width 1 kg roller Extruded at low temperatures, does not require a heated base unit and has a very low shrinkage rate of 0.3% | PLA is a plant-based plastic and therefore biodegradable; it smells slightly sweetish like roasted corn A disadvantage of PLA is its susceptibility to degradation by moisture, sunlight and heat. During processing, the material is more susceptible to overheating, which can lead to dripping and sagging when temperatures are too high. 1.75 mm ± 0.10 mm PLA filament with a roundness deviation of less than 0.03 mm Nominal processing temperature of 210 ˚C (410 ˚F) 195 mm roller diameter, 95 mm hub diameter, 38 mm spindle diameter, 80 mm roller width 1 kg roller Extruded at low temperatures, does not require a heated base unit and has a very low shrinkage rate of 0.3% | PLA is a plant-based plastic and therefore biodegradable; it smells slightly sweetish like roasted corn A disadvantage of PLA is its susceptibility to degradation by moisture, sunlight and heat. During processing, the material is more susceptible to overheating, which can lead to dripping and sagging when temperatures are too high. 1.75 mm ± 0.10 mm PLA filament with a roundness deviation of less than 0.03 mm Nominal processing temperature of 210 ˚C (410 ˚F) 195 mm roller diameter, 95 mm hub diameter, 38 mm spindle diameter, 80 mm roller width 1 kg roller Extruded at low temperatures, does not require a heated base unit and has a very low shrinkage rate of 0.3% | PLA is a plant-based plastic and therefore biodegradable; it smells slightly sweetish like roasted corn Sunlight and heat. During processing, the material is more susceptible to overheating, which can lead to dripping and sagging when temperatures are too high. 1.75 mm ± 0.10 mm PLA filament with a roundness deviation of less than 0.03 mm Nominal processing temperature of 210 ˚C (410 ˚F) 195 mm roller diameter, 95 mm hub diameter, 38 mm spindle diameter, 80 mm roller width 1 kg roller Extruded at low temperatures, does not require a heated base unit and has a very low shrinkage rate of 0.3% | PLA is a plant-based plastic and therefore biodegradable; it smells slightly sweetish like roasted corn Sunlight and heat. During processing, the material is more susceptible to overheating, which can lead to dripping and sagging when temperatures are too high. 1.75 mm ± 0.10 mm PLA filament with a roundness deviation of less than 0.03 mm Nominal processing temperature of 210 ˚C (410 ˚F) 195 mm roller diameter, 95 mm hub diameter, 38 mm spindle diameter, 80 mm roller width 1 kg roller Extruded at low temperatures, does not require a heated base unit and has a very low shrinkage rate of 0.3% | PLA is a plant-based plastic and therefore biodegradable; it smells slightly sweetish like roasted corn 10 mm PLA filament with a roundness deviation of less than 0.03 mm nominal processing temperature of 210 ˚C (410 ˚F) 195 mm roller diameter, 95 mm hub diameter, 38 mm spindle diameter, 80 mm roller width 1 kg roller Extruded at low temperatures, does not require heated base unit and has only a very low shrinkage rate of 0.3% | PLA is a plant-based plastic and therefore biodegradable; it smells slightly sweetish like roasted corn 10 mm PLA filament with a roundness deviation of less than 0.03 mm nominal processing temperature of 210 ˚C (410 ˚F) 195 mm roller diameter, 95 mm hub diameter, 38 mm spindle diameter, 80 mm roller width 1 kg roller Extruded at low temperatures, does not require heated base unit and has only a very low shrinkage rate of 0.3% | PLA is a plant-based plastic and therefore biodegradable; it smells slightly sweetish like roasted corn 3% on | PLA is a plant-based plastic and therefore biodegradable; it smells slightly sweetish like roasted corn 3% on | PLA is a plant-based plastic and therefore biodegradable; it smells slightly sweetish like roasted corn

Wie lange dauert es bis meine Bestellung eintrifft?

Nachdem die Bestellung aufgegeben wurde, dauert der DHL-Versand etwa 1-2 Werktage. 



Was muss ich für den Versand bezahlen?
  

Der Versand ist kostenlos.

 

 

Was sind die Rücksendungsbestimmungen?

Du kannst deine Artikel innerhalb von 14 Tagen ohne Angabe von Gründen an uns zurücksenden. Wir erwarten, dass sich die Artikel bei der Rückgabe im Originalzustand befinden.

 

 

Wie funktioniert die Rücksendung? 

Wenn dir ein Artikel doch nicht gefallen sollte, kannst du innerhalb von 14 Tagen nach Zustellung an uns zurück schicken. Bitte schreib uns an desupport@monoprice.com um ein DHL Retourenlabel zu erhalten. Bitte drucke das Retourenlabel, klebe es auf das sorgfältig verschlossene Paket und gib es einer Filiale der Deutschen Post ab. Bitte bewahre den Beleg mit der Sendungsverfolgungsnummer sorgfältig auf.